Manufacturing
Defined process requirements, applied at every scale
Lyteen is establishing its production model around explicit capability and quality requirements. Whether a batch is made at pilot scale or by a qualified manufacturing partner, it will run to the same specification, the same controls and the same records.
We do not yet operate a production facility. First production is planned with a qualified manufacturing partner, assessed against the requirements on this page. Everything below describes requirements we will verify with that partner before the first commercial batch, not an owned plant or a validated line.
01· Process flow
One process standard, from receipt to release
The sequence every Lyteen product will follow. The flow is verified on site, during actual operation, with our manufacturing partner.
- 01
Raw material receipt
Verified against specification and certificate of analysis before release to production
- 02
Batching & mixing
Locked formulation, verified weighing, controlled order of addition, time and temperature
- 03
Processing
A preservation step set by hazard analysis, validated, monitored and recorded
- 04
Filling & sealing
Hygienic fill, fill-weight and closure-integrity verification
- 05
Packaging & release
Coding, labelling, completed batch record, release against agreed criteria
02·Production capabilities, processing technologies & thermal processing
The capabilities our products require
Sauces and similar products demand specific processing capability. A preservation process that controls the relevant hazards while protecting flavour and colour, and equipment that handles viscous, particulate and emulsion-based products consistently, batch after batch.
We do not choose that process in advance. Storage route, preservation method and their limits are set by product-specific hazard analysis and then validated for the actual product, pack and equipment, with competent process-authority advice where it is required. Any facility producing Lyteen products, now or in the future, must show that validation, calibrated instrumentation and documented process control before the first commercial batch.
Requirements we will verify with our partner
- Preservation process
- Determined by hazard analysis, for example a heat treatment or hot fill, validated for the product and pack, with monitoring records
- Product handling
- Suitable for viscous, particulate and emulsified formulations without loss of homogeneity
- Process control
- Calibrated instrumentation, documented critical parameters and defined operating limits
03·Formulation & mixing, filling & packaging, in-process QC
Controlled from batching to sealed pack
Each stage of production will run to defined parameters and checks. Batching follows the locked formulation with verified weighing. Mixing is controlled for order of addition, time and temperature. Filling takes place under hygienic conditions with verified fill weights and closure integrity, and packaging is checked for coding, labelling and presentation before release.
In-process quality control is designed into the line rather than added at the end. Control points come from the product-specific hazard analysis, not from assumption. Sampling plans and batch records will mean every unit can be traced back to its inputs and process conditions, and any deviation is documented and closed before product moves on.
Requirements we will verify with our partner
- Batching & mixing
- Verified weighing, controlled order of addition, time and temperature logged
- Filling & sealing
- Hygienic filling, fill-weight verification, closure-integrity checks at defined frequencies
- Packaging & release
- Coding, labelling and presentation checks, completed batch record, release against agreed criteria
04·Scalability, process optimisation & manufacturing flexibility
Built to grow without changing the standard
Our production model is designed to scale in steps, from pilot volumes through partner manufacturing and, if volumes justify it, dedicated capacity, while the product specification and quality controls stay constant. Scale changes the equipment. It must never change the product.
Process optimisation will be continuous. From the first commercial batch we intend to measure yield, changeover efficiency, energy and water use and waste, and improve them batch by batch. Flexibility across formats and categories is a selection criterion for our manufacturing partner, so new products can be introduced without re-engineering the line.
Scaling principles
- Constant specification
- Same product, same controls, regardless of volume or site
- Measured optimisation
- Yield, changeover, energy, water and waste tracked per batch from first production
- Format flexibility
- Partner capability assessed against new formats and categories, not only the first range
Co-manufacturing or private label?
If you are a producer whose capability matches these requirements, or a partner looking for a co-developed product, we would like to talk. Our supplier and partner standards set out what we assess.